Lubricants - Agilent Technologies MS40-S Manual Del Usuario

Technical Information
The seam of the filter material must be oriented downwards.
NOTE
Figure 27 Filter
4

Lubricants

It will be readily understood how important adequate lubrication is to high
technology pumps like the Agilent vacuum pumps. Correct use of appropriate
lubricants makes a significant contribution to achieving best performance and
warding off defects.
When handling lubricants, the following sanitary protection measures should be
observed at all times:









MS40-S User Manual
Tighten the cap rotating clockwise, by hand or socket wrench with size 19 mm.
Avoid prolonged, excessive or repeated contact of the skin with products for
lubrication, and also avoid directly inhaling the fumes or vapors of such
products.
Protect the skin by wearing appropriate clothes and equipment (e.g. special
suits, glasses or, where permitted by the safety regulations, gloves) or by
applying a special protective product.
Clean the skin carefully after contact with the lubricants by washing freely with
water and soap.
Apply a skin cream after washing.
Take off and change clothes or shoes on which oil has been spilled.
Never put rags dripping with oil into the pockets of your clothes.
When disposing of waste lubricants, observe the following environment
protection regulations:
The lubricants risk contaminating the water and the ground! Therefore, never
pour lubricating products on to the ground, into water or in the sewage system.
All violations of these rules are liable to persecution as provided for by law.
When using lubricants always keep oil can nearby.
Take care in draining off waste oils. In disposal of these products respect all
regulations in force concerning waste oil disposal.
203