Safety Guideline For Rotary Vane Pumps - Agilent Technologies MS40-S Manual Del Usuario

Instructions for Use
CAUTION
Risk of injury through sharp edges
• Before servicing the pump or before any mounting/ dismounting action of
• Do not operate directly inside the high vacuum flange.
• If necessary, wear protective gloves according to EN 420.

Safety guideline for rotary vane pumps

Oil-lubricated rotary vane pumps can reach high operating temperatures. It is
therefore recommended to let the pump cool down before performing any type of
maintenance.



In case of a need to handle the pump after a period of operation, it must be
WARNING
left to cool first as the external surface temperature may be in excess of
60 °C.
To avoid damage to equipment and to prevent injuries to operating
WARNING
personnel the installation instructions as given in this manual should be
strictly followed!
MS40-S User Manual
the pump from the system, wait for the complete standstill of the pump.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
Always carry the pump by means of the ring-bolt provided.
The pump must be set in position taking the upmost care in order to avoid
accidental falls.
179