Status Led; Electronic Self-Test; Rotor Lock Test - Agilent Technologies MS40-S Manual Del Usuario

Technical Information

Status LED

Table 12 Status LED
LED STATUS
Off
Green blinking
Green
Red
Orange

Electronic Self-Test

When the pump is switched on with the main On/Off switch the pump doesn't start
immediately but it starts only after few seconds. During this phase the Status LED
remains lit orange fixed.

Rotor Lock Test

During the power operation, the rotational frequency is checked continuously. If the
rotor remains still for more than about 60 sec. the pump status is changed to "Fail".
Rotor Blocked Error.
208
CONTROLLER STATUS
Stop
Ramp – Autotuning
Normal Operation
Fail
Initial self-test
MS40-S User Manual