SKF TKSA 40 Instrucciones De Uso página 22

On top of each column, a non editable blank field is available
Press OK to confirm and use the field (the selected field dot is displayed next to the field,
and the field value is displayed in the main file name field).
Once all desired field are selected, navigate to the main file name field to complete the
name if required and press OK to confirm and save the name.
If the name entered is already used for another file, an information screen is displayed.
Select the Save file icon to overwrite the existing file. Select the 'Do not save' icon to
return to the results screen without saving the existing file.
The saved file is displayed on the screen.
It consists in two or three different screens (the third screen displaying the soft foot
value appears only if the soft foot check has been performed prior to the measurement)
displaying:
Fig. 20 Measurement results (see section 3.6)
Fig. 21 Application dimension (see section 3.4)
SKF TKSA 40
Screen toggle
Exit the saved
file
Fig. 22 Soft foot check results (only if soft foot
check is performed, see section 3.9)
21