SKF TKSA 40 Instrucciones De Uso página 26

Soft foot mode, to check the presence of a soft foot on the moveable machine. See
section 3.9
Settings menu, to adjust general settings. See section 4.
3.9 Soft foot
Before starting the alignment it is recommended to check the Movable machine for soft
foot.
"Soft foot" is the expression used when a machine is not resting equally on all feet
(see fig. 26)
Fig. 26 Soft foot
To find and correct the soft foot:
Enter the soft foot detection mode by selecting the soft foot icon when available on the
screen (section 3.4, 3.6, 3.8) and press OK.
Tighten all feet bolts and rotate the measuring unit to the 12 o'clock and press OK to
confirm (see fig. 27)
Fig. 27 Application and measuring units ready for soft foot detection
With the help of the directional arrows, navigate to the foot to be checked, and press OK
(see fig. 28)
SKF TKSA 40 25