SKF TKSA 40 Instrucciones De Uso página 27

Fig. 28 Selection of the foot to be checked
Once the display is reset on the screen (see fig. 29), loosen the selected foot and
re-tighten it.
Fig. 29 Foot deviation value reset
The largest deviation is registered automatically by the unit.
Press OK to confirm and return to the foot selection screen (see fig. 30).
Fig. 30 Foot deviation value registered, and new foot selected
Check all feet going through the same process.
The result screen is displayed, with all feet deviation (see fig. 31)
26 SKF TKSA 40