Prebena KTVH-B19D Manual De Instrucciones Original página 69

ATTENTION
Damaged hoses can burst and cause property damage due to
escaping air.
 Check the compressed air system and the stapler unit for
damages before connecting.
 Connect the stapler unit only to a functioning compressed air
system.
 Push the quick-release (1) of the compressed air hose to the
connector (2) until it clicks into place.
 Check the operating pressure at the pressure gauge of the
compressor.
The maximum allowable operating pressure of the stapler unit is 8.3
bar.
 In this case, disconnect the air hose from the stapler unit
immediately.
WARNING
Danger of explosion if maximum operating
pressure is exceeded.
Prepare stapler
19