Triggering Manually-Operated Stapler Units - Prebena KTVH-B19D Manual De Instrucciones Original

Operate stapler

Triggering manually-operated stapler units

 Replace the stapler with the mouth of a cardboard material.
 Hold the handle (8) firmly.
 Press the hand lever (10) with the other hand and apply even
pressure downwards until it stops.
A fastener is driven through the box and formed by both benders.
 Check the setting by a simple triggering on the sample material
(see page 30).
 Move the hand lever (10) back into its original position.
 To drive in further fasteners, repeat these steps.
32