Staple Adjustment For Pressure-Operated Staplers - Prebena KTVH-B19D Manual De Instrucciones Original

Staple adjustment for pressure-operated staplers

With the adjusting disc (6) the pressing of the stapler can be set. It is
possible to bend the staple from very loose to very tight.
► Disconnect the stapler unit from the compressed air supply.
► Use a rod with a 3mm diameter of a 2.5mm Allen key.
► Turn the adjustment wheel (6) to the right to bend the staple very
loosely.
► Turn the adjustment wheel (6) to the left to bend the staple very
tightly.
Position of the
adjusting disc
Bending image
of the staple
Tight Standard
Operate stapler
Loose
27