Other Faults; Fault Overview - Prebena KTVH-B19D Manual De Instrucciones Original

Other faults

If a fault occurs on the stapler unit that you cannot resolve by oiling
and cleaning, you must notify PREBENA service.
 Do not make any repairs to the stapler unit.
 Make sure that all faults of the stapler unit are remedied by
PREBENA service.

Fault overview

In the following overview, possible faults and the necessary
measures are listed.
Symptom
The stapler unit loses
air.
Fasteners are not fully
driven.
Possible cause
The mounting screws
are loosened.
A seal is broken.
The operating
pressure is too low.
The driver tip on the
stapler unit is worn.
Corrective actions
 Tighten the mounting
screws.
 Contact customer service
(see page 48).
 Increase operating
pressure (see page 17).
 Contact customer service
(see page 48).
Faults
41