Transport And Store Stapler; Packaging; Transport; Transport Over Short Distances - Prebena KTVH-B19D Manual De Instrucciones Original

Transport and store stapler

Packaging

Pack the stapler unit prior to storage or transport over the following
distances:
 Distances longer than 10 m.
 Routes passing through unstable surface.
 Routes that are travelled in an unusual posture.
To do this, carry out the following preparatory steps:
 Disconnect the stapler unit from the compressed air feed (see
page 33).
 Let the pressure escape completely from the stapler unit.
 Empty the magazine (see page 33).
 If necessary, clean the compressed air connections of foreign
substances and impurities.
 Place the stapler unit in the carrying case.
 S Close the transport case and the latches for the lid.

Transport

The method of transport differs depending on whether you move the
stapler unit over short or long distances.

Transport over short distances

Short distances are distances of up to 10 meters in length.
WARNING
Accidentally triggering can cause serious injury
or death.
 Disconnect the stapler unit from the
compressed air supply during each
transportation (see page 33).
 Carry the stapler unit by the handle.
 Do not touch the trigger button during
transport.
Transport and store stapler
35