Surround Parameter Button; Display - Denon AVR-3802 Instrucciones De Operación

ENGLISH
3
Set the surround parameter mode.
SURROUND
PARAMETER
SURR.
PARA.
(Main unit) (Remote control unit)
The on-screen display differs according to whether the operation is performed from the main unit or
the remote control unit.
4
Select the play mode.
TUNING
SELECT
BAND MODE
TUNING
(Main unit) (Remote control unit)

Display

MODE CINEMA MODE MUSIC
5 Select the various parameters. (See "Surround parameters q" for a description of the various parameters.)
SURROUND
TUNING
PARAMETER
BAND MODE
TUNING
(Main unit) (Remote control unit)
MODE CINEMA MODE MUSIC
CINEMA EQ PANORAMA
DIMENSION
CENTER WIDTH
6
Set the various surround parameters.
TUNING
SELECT
BAND MODE
TUNING
(Main unit) (Remote control unit)
28
All manuals and user guides at all-guides.com
Display
MODE CINEMA
MODE PRO LOGIC
MODE PRO LOGIC
When set with the on-screen display using
CINEMA EQ
the remote control unit while in the MUSIC
mode, set the " " mark to "OPTION 0"
using the D and H cursor buttons, then press
the F cursor button.
Press the ENTER button to return to the
previous screen.
7
When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the SURR.
PARA. button to finish.
NOTE:
• There are four Dolby Surround Pro Logic modes
(NORMAL, PHANTOM, WIDE and 3 STEREO).
The AVR-3802 sets the mode automatically
according to the types of speakers set during the
system setup process (page 10).
Surround parameters q
Pro Logic II Mode:
The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes ("Cinema", "Music" or "Pro Logic").
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from o to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phontom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
Dolby Digital mode (only with digital input) and DTS Surround mode
(only with digital input)
1
Select the input source.
Playback with digital input
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
FUNCTION
VDP
5
(Main unit) (Remote control unit)
w Set the input mode to "AUTO" or "DTS".
AUTO DTS
MODE
(Main unit) (Remote control unit)
2
Select the Dolby/DTS
DOLBY/DTS
SURROUND
Surround mode.
(Remote control unit)
When performing this operation from the main
unit's panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro logic or DTS NEO:6.
SURROUND SELECT
MODE
(Main unit) (Remote control unit)
1 3
B
3 1 2 4,5 2,6
POWER
ON /
OFF SOURCE
RC-884
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
4
SURR.
OSD
PARA.
SETUP
RETURN
TUNING
A/B
5, 6
MEMORY
BAND MODE
CHANNEL
VOLUME
TUNING
+
+
SKIP
ENTER
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
1
4 5 6
VCR-1 VCR-2/V.AUX
TV/DBS
7 8 9
TV/ 0
+10
VCR
RDS PTY RT
TEST
SPEAKER OUTPUT
TONE
SURROUND
2
DOLBY/DTS DSP 5CH / 7CH
SURROUND SIMU. STEREO
3
6.1 / 7.1
DIRECT STEREO
SURROUND
INPUT
1
MODE ANALOG EXT.IN
SYSTEM CALL
CALL 1 CALL 2
BACKLIGHT