Denon AVR-3802 Instrucciones De Operación página 31

• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
SELECT
(Main unit)
• When turned clockwise
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6
MATRIX VIDEO GAME JAZZ CLUB
• When turned counterclockwise
DIRECT STEREO DOLBY PRO LOGIC II DTS NEO:6
MATRIX VIDEO GAME JAZZ CLUB
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the surround mode button then operate the selector.
SURROUND
MODE
(Main unit)
2
Press the SURROUND PARAMETER button.
SURROUND
PARAMETER
Press and hold in the surround parameter button to select the parameter you want to
set.
• The parameters which can be set differ for the different surround modes. (Refer to
"Surround Modes and Parameters" on page 32.
(Main unit)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC, DTS NEO:6 modes and the
input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS
surround.
All manuals and user guides at all-guides.com
B
1 2
5/7CH STEREO WIDE SCREEN
ROCK ARENA MONO MOVIE
5/7CH STEREO WIDE SCREEN
ROCK ARENA MONO MOVIE
Tone control setting
• Use the tone control setting to adjust the bass and treble as desired.
• To operate the tone control from the remote control unit.
1
Display the surround parameter
SURR. screen on the monitor.
PARA.
The screen for the selected
surround mode appears.
1,3
"TONE" cannot be selected
(Remote control unit)
in the Direct mode.
2
Select "TONE".
TUNING
BAND MODE
TUNING
(Remote control unit)
3
Switch to the Tone Control
ENTER
screen.
SHIFT
(Remote control unit)
4
To select Bass or Treble.
TUNING
BAND MODE
TUNING
(Remote control unit)
5
Enter the setting.
ENTER
The surround menu screen re-appears.
SHIFT
(Remote control unit)
6
To end the setting mode, press the surround parameter button again.
SURR.
PARA.
(Remote control unit)
• To operate the tone control from the main unit.
1
The tone switches as follows each time the TONE CONTROL button is pressed.
TONE
CONTROL
BASS
(Main unit)
2
With the name of the volume to be adjusted selected, turn the SELECT knob to adjust
SELECT
the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in
steps of 2 dB.)
(Main unit)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in
steps of 2 dB.)
To set the level.
TUNING
BAND MODE
TUNING
(Remote control unit)
TREBLE
0 1
ENGLISH
POWER
ON /
OFF SOURCE
RC-884
REMOTE CONTROL UNIT
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
DISPLAY MENU
1, 6
SURR.
OSD
PARA.
SETUP RETURN
TUNING
A/B
4
MEMORY
BAND MODE
CHANNEL VOLUME
TUNING
+
+
SKIP ENTER
3, 5
-
-
SHIFT
SKIP
MUTING
TUNER PHONO CD
1 2 3
CDR/TAPE VDP DVD
4 5 6
VCR-1 VCR-2/V.AUX TV/DBS
7 8 9
TV/
0 +10
VCR
RDS PTY RT
31