Etac Molift Air 200 Manual Del Usuario página 9

IRC - In Rail Charging (only for Molift Air 350)
The lifter is charged through a built in charger in lift motor for
continuous charging through the entire rail system length.
Molift Air IRC has a built in charger, connected to the battery. It
must be installed with IRC Trolley in a rail system with a conduc-
tive tape. The IRC trolley is connected to the battery charger
inside the Molift Air IRC. The IRC trolley is always in contact with
the the conductive tape inside the rail. The IRC power supply is
connected to the conductive tape through IRC connection at the
end of the rail, and supplies power to the battery charger inside
Molift Air IRC.
Trolley
IRC
IRC fits both Single rail and Traverse systems.
Conductive
Tape
Trolley
IRC
IRC connection RH62
connected to IRC power supply
IRC Power Supply
Art. no.: 2510119
Charger 3844 DC/DC (Part of Molift Air IRC)
Art. no.: 2640101
All manuals and user guides at all-guides.com
Conductive
Tape
IRC connection RH62
connected to IRC power supply
Traverse
trolley IRC
IRC connection RH112
Connected to
traverse trolley
Conductive
Tape
Transfer
Plan the lifting operation in advance to ensure that it is as safe
and smooth as possible. Remember to work ergonomically. Assess
the risks and take notes. The assistant is responsible for the safety
of the user.
Molift Air can be used with both 2-point and 4-point sling bar for
different types of transfers; sitting, recumbent or ambulating.
Using slings
It is important that the sling has been tested with the individual
user and for the intended lifting situation.
Read User Manual for the sling prior to use.
Do not to use damaged or badly worn slings.
Slings made by other manufacturers
We recommend only using Etac or Molift slings. Etac shall not
be liable for faults or accidents that can occur when using slings
made by other manufacturers.
Lifting and lowering
When moving the client, stand to the side of the client you are
lifting. Make sure that arms and legs do not obstruct the seat,
bed, etc. Keep eye contact with the client to help them feel safe.
The 4-point sling bar must always be positioned across the client,
to prevent the client from unintentionally sliding out of the sling.
6
Molift Air / www.etac.com