Fein BLS 1.6 Serie Manual Del Usuario página 11

3 41 01 042 06 3 - Buch Seite 11 Mittwoch, 23. April 2003 8:27 08
BLS 1.6 X
Cleaning and care.
!
Risk of injury
by switching the tool ON unintentionally.
Before cleaning, pull out the mains plug.
Carry out the following once a week, or
more often if the power tool is used more
frequently:
Clean the venting openings.
Blow out the motor space from outside
with dry compressed air.
Maintenance and repairs.
!
Risk of injury
Service, testing and repairs may only be car-
ried out by electrical engineers in conformity
with the regulations valid in the respective
country.
Maintenance and repairs.
We recommend our customer service
department (repair centre), FEIN author-
ised service centres and agencies.
Addresses can be found at the end of
these operating instructions and in the
enclosed safety instructions.
Please hand these operating instructions
to the repair centre. An overview of spare
parts can be found at the end of these
operating instructions.
Upon request a repair manual is sent to
the electrical engineers.
Only use original FEIN spare parts.
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), reference no. (2) as well
as the number of spare parts (3) facilitates
the ordering procedure.
Accessories.
Illustrations and reference numbers can be
found at the end of these instructions.
Description of the accessories:
A Blades for use on the plunger or table,
for cutting steel sheet up to
2
800 N/mm .
B Cutting paste.
C Metal carry case
(390 x 240 x 110 mm).
Guarantee.
All the FEIN electric power tools are
tested carefully and are subject to the
stringent requirements of the quality con-
trol at FEIN.
In addition to the legal warranty we also
provide the FEIN manufacturer's guaran-
tee. For further details on this, please con-
tact your specialist dealer, your national
FEIN representative, or the FEIN cus-
tomer service centre.
Damage due to improper handling, over-
loading or normal wear are generally not
covered by the guarantee.
Environmental protection.
Packaging, worn out power tools and
accessories should be recycled.
Further information is available from your
dealer.
EN
11