Fein BLS 1.6 Serie Manual Del Usuario página 9

3 41 01 042 06 3 - Buch Seite 9 Mittwoch, 23. April 2003 8:27 08
BLS 1.6 X
Operating instructions for sheet metal
shears.
Overview.
1 Switch
For switching ON/OFF.
2 Plunger blade
3 Fixed blade
4 Hand guard
5 Supplied accessories
Allen key SW 2 mm.
Allen key SW 3 mm.
For your safety.
Before using this power tool, read
and comply with:
these operating instructions,
the enclosed safety instructions (docu-
ment number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
These operating instructions and the
enclosed safety information should be
kept carefully for later use and enclosed
with the power tool, should it be passed
on or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for cutting sheet metal (maximum cutting
capacities are listed in the Specifications),
for applications using the plunger blades
and fixed blades,
given in these operating instructions or
those recommended by FEIN.
Do not cut sheet metal along welding
points. Do not cut multi-layer sheets
which exceed the maximum cutting
capacity.
Safety instructions.
!
Risk of injury
Always wear protective gloves.
When working overhead, wear protective
glasses.
Only work using the hand guard.
Only work with sharp blades that are not
damaged.
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
!
Damage to property/material
Mains voltage must correspond with the
voltage specifications on the power tool.
Personal protective equipment.
When using this power tool wear the fol-
lowing protective items:
Protective gloves, sturdy shoes, apron (if
necessary).
EN
9