Operation - Gardena ClassicCut Li 9853 Instrucciones De Empleo

Only work in the daylight or when visibility is good.
Check your product before each use. Always visually
inspect your Hedge Trimmer before each use. Check that
the ventilation slots are not obstructed in any way.
Check the blade before usage.
Keep the blade well maintained.
If the product got hot while operation, let it cool down
before storage.
Do not overload the product.

2. OPERATION

DANGER! Risk of injury!
Cut injury when the product starts
accidentally.
v Wait for the blade to stop and slide the
pro tective cover over the blade before you
adjust or transport the product.
To charge the battery [ Fig. O1 ]:
CAUTION!
Overvoltage damages the battery and the
charging power supply.
v Make sure that you use the correct mains voltage.
9856-39.960.02.indb 11 9856-39.960.02.indb 11
Warning! When wearing hearing protection, and due to
the noise produced by the product, the operator may not
notice persons approaching.
Always wear suitable clothing, protective gloves, and stout
shoes.
Always ensure that you have a secure foothold whilst
working.
Do not work on slippery sufaces.
Before you use the battery the first time, the battery must
be completely charged.
The lithium-ion battery can be charged in any state of
charge and the charging process can be disconnected
at any time without to damage the battery (no memory
effect).
1. Connect the charging power supply
socket.
2. Connect the battery charger cable
;
socket .
When the battery charging indicator
green the battery is being charged.
When the battery charging indicator
illuminates green, the battery is completely charged
(Charging time see 6. TECHNICAL DATA).
(C)
into a mains
(E) to the charging
(L1) / (L2) / (L3) flashes
(L1) (L2) (L3)
+ +
11
23.04.21 08:51 23.04.21 08:51