Gardena ClassicCut Li 9853 Instrucciones De Empleo página 12

3. Examine the charge status regularly while you charge.
4. When the battery is completely charged, disconnect the
battery charger cable
5. Disconnect the charging power supply
mains.
Battery charging indicator [ Fig. O2 ]:
Battery charging indicator during charging:
(L1)
100 % charged
(L1)
66 – 99 % charged
(L1)
33 – 65 % charged
0 – 32 % charged (L1)
Battery charging indicator during operation
(for 5 sec.):
(L1)
66 – 99 % charged
(L1)
33 – 65 % charged
11 – 32 % charged (L1)
(L1)
0 – 10 % charged
To adjust the handle (only for ComfortCut Li) [ Fig. O3]:
The handle can be adjusted in 5 steps to suit individual
requirements.
(1)
v Push the elbow joint
(2)
handle to the desired angle.
To change the blade [ Fig. O4 ]:
Only the GARDENA blade may be used:
– GARDENA Grass and Boxwood blade Art. 9862
– GARDENA Shrub blade Art. 9863
12
9856-39.960.02.indb 12 9856-39.960.02.indb 12
(E) from the charging socket ;
(C)
from the
(L2) (L3)
, and illuminate (for 60 sec.)
(L2) (L3)
and illuminate, flashing
(L2)
illuminates, flashes
flashes
(L2) (L3)
, and illuminate
(L2)
and illuminate
illuminates
flashes
on both sides and adjust the
1. Press the lock buttons
and remove the blade
.
2. Place the other blade
To start the battery shear:
DANGER! Risk of injury!
Risk of injury if the product does not stop
when you release the start lever.
v Do not bypass the safety devices or switches.
For example do not attach the start lever to the
handle.
To start:
The product is provided with a safety device (start
lever with starting lockout) to prevent the product
from being turned on by accident.
Without telescopic handle [ Fig. O5 ]:
1. Remove the protective cover from the blade.
(2)
2. Hold the handle , push the starting lockout
and pull the start lever
The battery shear starts.
3. Release the starting lockout
With telescopic handle [ Fig. O6 ]:
When the telescopic handle is assembled, the
(5)
starting lockout and the start lever
battery shear are without function.
1. Assemble the telescopic handle.
2. Remove the protective cover from the blade.
(3)
on both sides at the same time
(4)
.
(4)
.
(5)
forward
(6)
.
(5) again.
(6)
on the
23.04.21 08:51 23.04.21 08:51