DESCRIPTION OF THE PRODUCT
2
GENERAL CHARACTERISTICS OF THE OPERATOR
The (VU) VULCAN operator is constructed to form part
of a swing gate automation system. Allows the
requirements of standard EN 12453 to be fulfilled.
It comprises a metal body, which contains a hydraulic
pump and a drive piston.
VUA and VU2A Models
(with mechanical slow down)
The VUA models have mechanical slow down bushing
in the piston rod, meaning the speed slows down when
approaching the end of the extension travel (closing
travel, when the operator is installed for inward
opening), ending in a soft stop.
The VU2A models have mechanical slow down for the
two travels (opening and closing).
3
MAIN OPERATOR PARTS
1
Supports
2
Ball and socket joint
3
Piston rod
4
Piston rod cover
Fig. 2 VULCAN operator main parts (locked models)
48
Installation manual
All manuals and user guides at all-guides.com
5
Closing force adjustment
6
Opening force adjustment
7
Unlocking screw (only locked
models)
VUS Models
(with patented obstacle detection)
The VUS models are fitted with an exclusive safety
system, patented by ERREKA.
This safety system is capable of detecting the collision of
the gate against an obstacle, informing the control
panel of this incident, in order to invert operation.
Hence, the VUS models, along with the ERREKA control
panels, allow the requirements of standard EN12453 to
be met without the need for peripheral elements.
8
Electrical connections cover
9
Discharge screw