Maintenance, Cleaning And Repair; Maintenance And Cleaning; Repair - Festo 8005374 Manual De Instrucciones

7 Maintenance, cleaning and repair

7.1 Maintenance and cleaning

Festo Didactic systems and components are to a great extent maintenance-free. The following components
should be cleaned at regular intervals:
•
The lenses of the optical sensors, the fiber optics and the reflectors
•
The active surface of the proximity sensor
with a soft, lint-free cloth or brush.
Note
Do not use aggressive or abrasive cleaning agents.

7.2 Repair

The components may be destroyed due to incorrect handling or connection. For this reason the structure of
the components is such that they can be repaired simply.
Levering open the latch
© Festo Didactic 8114361
Component sets for Electrical engineering/Electronics
The transparent bottom part can be easily separated
from the top part. To do this the latch can be levered
open via a small screwdriver at each corner.
The defective component on the circuit board is then
replaced with a new one and the top and bottom part
engaged again.
27