12 Maintenance and care
The MPS
stations are largely maintenance-free. The following components should be cleaned at regular
®
intervals with a soft, lint-free cloth or brush:
•
The lenses of the optical sensors, the fiber optics and the reflectors
•
The active surface of the proximity sensor
•
The complete stations
Note:
Do not use aggressive or abrasive cleaning agents.
13 Further information and updates
More information, current PLC programs for various controllers and technical documentation can be found
on the Internet at the following website:
www.ip.festo-didactic.com
© Festo Didactic 8097301
MPS
System 203 Industry 4.0
®
65