Peltor Lite-Com Pro Guia De Inicio Rapido página 4

PELTOR Lite-Com Pro
Programmable wireless communication headset
The Peltor Lite-Com Pro offers reliable, efficient wireless communication between two or more people,
even in noisy environments.
The product is approved for use in explosive environments (ATEX).
Read these instructions carefully to ensure the best possible benefit from your Peltor product!
PROPERTIES
• Wireless programmable communication headset for 30 radio channels in the 430–470 MHz frequency
range. The highest power gives a range of up to 3 km outdoors. Low power gives a range of up to
about 1 km.
• 38 CTCSS and 83 DCS subchannels, allowing multiple users to use the same channel without
interfering with each other.
• Operating time up to about 40 hours, depending on the type of battery and mode of use.
• Low battery alarm.
• Automatic shut-off after the last activation.
• Selected settings are confirmed with a voice message.
• The last setting is stored when the unit is switched off.
• Programmable
Special software is available for customising functions in your Lite-Com Pro.
Contact your Peltor dealer for information.
ADVANTAGES (Fig. H)
1. Extra broad headband (MT7H7F470-50) with soft padding for ideal comfort throughout the
working day. Specially designed helmet attachments (MT7H7P3E470-50) with slots for attaching
a visor and rain shield.
2. Individually sprung headband wires of stainless steel provide an even distribution of pressure
around the ears. Steel headband wires maintain their resilience better than regular plastic
headbands through a wide range of temperatures.
3. Low, two-point fasteners and easy height adjustment with no protruding parts.
4. Soft, wide foam/fluid-filled ear cushions with built-in pressure-relief channels for low pressure,
effective sealing and individual comfort.
5. Flexible antenna with low attachment and high receptivity.
6. Connector for external equipment, such as another communication radio, mobile telephone, MP3
player etc.
7. Batteries The Lite-Com Pro is delivered with Peltor's ACK05 NiMH battery and the applicable
battery charger. Regular AA batteries can also be used. NOTE: See BATTERIES below!
8. Delivered with an ambient-noise compensated speech microphone for high speech recognition
and with Quick Positioning for easy adjustment of the microphone arm.
9. Keypad for easy regulation of Lite-Com Pro settings.
10. Additional functions can be programmed with software available at authorised Peltor dealers.
PUSH-BUTTONS (Fig. A)
1. ON/OFF/FUNCTION (¡) Switches the Lite-Com Pro on and off, and lets you choose between
alternatives in the menu.
2. (+) Increases the level of the selected function.
up
3. (–) Decreases the level of the selected function.
down
4. PTT Transmits with the Lite-Com Pro.

All manuals and user guides at all-guides.com