Kobalt SGY-AIR88TZ Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
4. Pour paint into paint cup and put on cover.
(See Fig. 4 – Oil and water extractor, and air
compressor not included)
5. Connect air tube to air intake connector from
air compressor. Set pressure to 60 psi. Fully
open air adjustment knob and adjust the spray
pattern adjustment knob to proper range (See
Figure 5; all accessories shown may not be
included).
All manuals and user guides at all-guides.com
7
4
Load paint
5
G
Clockwise