Repair Instructions - Kobalt SGY-AIR88TZ Manual De Instrucciones

REPAIR INSTRUCTIONS

4. Mount the nozzle set:
a. Screw on paint nozzle (See Fig. 8).
b. Attach the air cap w/ring and tighten
(See Fig. 9).
c. Put on paint needle (See Fig. 10).
d. Attach the needle spring (See Fig.11).
e. Screw on the fluid adjustment knob
(See Fig. 12).
NOTE: Test spray pattern before use again. During normal use, the air cap wings are
horizontal and the air cap should be pointed up as shown (See Figure 13). This
provides a vertical fan-shaped pattern which gives maximum and even material
coverage as the gun is moved back and forth parallel to the surface being finished.
All manuals and user guides at all-guides.com
6
1
8
10
12
10
7
2
9
11
13
The air cap wings
are horizontal.