Uline OHAUS AVIATOR 7000 Manual Del Usuario página 5

ZEROING
Due to soiling on the weighing pan or unfavorable
external influences, it is possible that the weight display
of an unloaded weighing pan may no longer be 0.000.
In such cases, the scale must be reset to zero. The
maximum allowed deviation to be compensated by
zeroing is +/- 2 % of the weighing range.
1. Press the ZERO key.
(See Figure 13) The weight
display is set to zero.
BY-COUNT OPERATION
With the by-count function, you can price non-weighing
items, e.g., in the bakery department. Pricing can base
on a deal quantity of, e.g., three pieces.
1. Enter the deal quantity
(1-99). (See Figure 14)
2. Press the X key to call up
the by-count function.
The by-count icon is
displayed.
3. Enter the price per deal
quantity.
4. Confirm with the ENTER
(ON/OFF) key.
5. Enter the number of items
(1-99). The price to pay is
displayed.
• The unit price is stored until by-count operation
is ended.
• Use the C key to leave by-count operation.
PAGE 5 OF 39
OPERATION CONTINUED
Figure 13
kg
kg
Figure 14
0 ... 9
x
0 ... 9
0 ... 9
ACCUMULATING
This functionality is only legal in certain regions or, if
acceptable, if the weighing system is connected to an
external printer.
1. Place the first item on the
scale. (See Figure 15)
2. Enter the unit price.
3. Press the ENTER (ON/OFF)
key. The total price to pay
and the number of items
are displayed.
4. Remove the item and
press the ENTER (ON/OFF)
key again. The weight
display is shown.
5. Repeat steps 1 to 4 for
more items.
6. To finish the transaction,
press the ENTER (ON/OFF)
key. The total price to pay
and the number of items
is displayed.
7. To clear the total, press
and hold the C key. The total is cleared.
If a printer is connected, a printout can be generated
by pressing the ENTER (ON/OFF) key twice. After printing,
the total is cleared automatically.
CHANGE FUNCTION
The scale is able to calculate the amount of change.
SINGLE ITEM
1. Carry out pricing as
described in the Free
Input section on page
two. (See Figure 16)
2. Press the CHANGE key.
The total price to pay is
displayed.
3. Enter the customer's
payment and press the
FIX key. The amount of
change is displayed.
4. Press the C key to return to
normal weighing mode.
Figure 15
...
...
Figure 16
...
0...9
0721 IH-5116