Using Tare - Uline OHAUS AVIATOR 7000 Manual Del Usuario

PLU PRESET KEYS WITH TWO PLUs
(Factory setting, operator setup step 14 = on)
STORING TWO PLUs TO A PRESET KEY
1. Enter the unit price or
recall PLU of the first PLU to
be assigned to the preset
key. (See Figure 9)
2. Press and hold the desired
preset key, e.g., M1, until a
long beep can be heard.
Two short beeps indicate
that the data has been
stored.
3. Enter the unit price or
recall PLU of the second
PLU to be assigned to the
preset key.
4. Press and hold the desired
preset key, e.g., M1, until a
long beep can be heard.
5. Immediately press the desired preset key again, e.g.,
M1. L2 is displayed and two short beeps indicate
that the data has been stored.
CALLING UP TWO PLUs WITH PRESET KEYS
1. Place the item on the
scale. (See Figure 10)
2. To call up the first PLU,
press the corresponding
preset key once, e.g.,
M1. Unit price and price
to pay of the first PLU are
displayed.
To call up the second PLU,
press the corresponding
preset key twice. Unit
price and price to pay
of the second PLU are
displayed.
3. Remove the item from the scale. All displays return
to zero.
PAGE 4 OF 39
OPERATION CONTINUED
Figure 9
0 ... 9
M1
0 ... 9
M1
M1
Figure 10
M1
M1 M1

USING TARE

If you know the weight of your containers, you can enter
the tare weight via the keyboard (so you do not have to
tare the empty container).
TARING AN EMPTY CONTAINER
1. Place the empty
container on the scale.
(See Figure 11)
2. Press the TARE key. The
weight display is reset to
0.000 and the NET symbol
appears. The tare weight
is displayed in the bottom
line of the display.
3. Fill the container with the
goods to be weighed.
4. Carry out pricing as
described above.
5. Remove the container from
the scale. All displays return to zero.
KEYBOARD TARE
1. Input the known tare
value and press the TARE
key. The input tare value
is displayed in the bottom
line of the display and
the PT cursor is lit. The
weight display shows the
negative tare value.
(See Figure 12)
2. Place the item with
container or wrapping
material onto the scale.
3. Carry out pricing as described above.
4. Remove the item with container or wrapping
material from the scale. All displays return to zero.
Figure 11
...
Figure 12
0 ... 9
...
0721 IH-5116