Backlight Function; Printout Example Ticknr; Plu Text Lb (Pcs) $/Lb(Pcs); Plu 5 - Uline OHAUS AVIATOR 7000 Manual Del Usuario

SWITCHING WEIGHING UNIT BETWEEN KG.
AND LB.
This function is only available if permitted by the
national weights and measures regulations.
1. Carry out pricing as
described on page two.
(See Figure 21)
2. Press the UNITS key until a
long beep can be heard.
The weight is displayed in
the second weight unit.
3. Press the UNITS key again
until a long beep can be
heard to return to the first
weight unit.

BACKLIGHT FUNCTION

If the light of the environment is not bright enough to get
a clear reading from the display, the backlight can be
switched on.
SWITCHING BACKLIGHT ON/OFF
• Press and hold the C key
until a long beep can be
heard. The backlight is
switched on/off.
(See Figure 22)
When the scale is not used for 15 seconds, the backlight
automatically switches off. When a weight is placed
on the scale or when a key is pressed, the backlight
switches on again.
TICKET PRINTING
• Ticket printing is not available in all countries.
• For ticket printing, operator setup step 16 must be
set to "1."
TICKET WITHOUT TAX
For ticket printing without tax,
operator setup Step 21 must
be set to "OFF."
1. Carry out accumulating
as described on page five.
2. To finish the transaction,
press the ENTER (ON/OFF)
key. The total price to pay
and the number of items are
displayed. (See Figure 23)
PAGE 7 OF 39
OPERATION CONTINUED
Figure 21
...
Figure 22
Figure 23
...
totAL
5
...
3. If desired, enter the amount of change as described
in the Change Function section on page five.
4. To initiate printing, press the ENTER (ON/OFF) key twice.
5. Press the C key to cancel the transaction.
Printout example
TickNr 25
2010-10-10 10:10
-----------------------------------------
PLU TEXT
lb (pcs)
-----------------------------------------

PLU 5

0.110

Preset 1

1.165
Non PLU
5
-----------------------------------------
Total

Cash

-----------------------------------------

Change

TICKET WITH TAX
For ticket printing with tax, operator setup step 21 must
be set to "ON."
STORING TAX ON A KEY
To store a tax on the keys M9 to M12, operator setup step
22 must be set to "1."
1. Press and hold one of the
keys M9 to M12 until a
long beep can be heard.
(See Figure 24)
2. Enter tax rate and confirm
with the ENTER (ON/OFF)
key, e.g., enter 7.00 for tax
rate 7%.
PRINTING A TICKET WITH TAX
1. Carry out pricing as
described on page two.
2. Press the corresponding
tax key (M9 to M12).
(See Figure 25)
3. Repeat steps 1 and 2 for
further items.
4. To finish the transaction,
press the ENTER (ON/OFF)
key. The total price to pay
and the number of items
are displayed.
$/lb(pcs) $
45.67 5.02
4.56 5.31
0.95 4.75
15.08
20.00
4.92
Figure 24
M9 ... M12
0 ... 9
Figure 25
...
M9 ... M12
...
totAL
...
0721 IH-5116
5