Headlight Adjustment - SWM RS 125 R 2020 Manual Del Usuario

HEADLIGHT ADJUSTMENT

When checking the proper aiming of the headlight
beam: inflate tyres at the right pressure, have a person
sit astride the motorcycle and set the motorcycle
perpendicular to its longitudinal axis.
At 10 metres from a wall or screen, trace a horizontal
line at the height of headlight centre and a vertical one,
in line with vehicle longitudinal axis.
If possible, carry out this check in a shaded place.
10 m
When the high beam is on, the upper edge between
dark and lit zone should be at a height not exceeding
9/10th of headlight centre height from ground.
9 x
x
10
The direction can be adjusted as follows:
Operate on the adjustment screw (1);
-
screw to raise the beam;
-
unscrew to lower the beam.
-
53
EN -