SWM RS 125 R 2020 Manual Del Usuario página 96

TENSION REGULATOR
The tension regulator (1) is fixed to the right side
of the frame, in the front part.
COMBINED BRAKING PEDAL POSITION
ADJUSTMENT
The position of the combined braking pedal with
respect to the footrest may be adjusted according to
the individual needs.
To adjust, proceed as follows:
loosen the screw (1);
-
turn the cam (2) to lower or raise the brake pedal (3)
-
by the length (A);
tighten the screw (1) at the end of the adjustment.
-
Once this adjustment is completed, adjust the free
play of the pedal as follows.
33
EN -