Smoke hollow DG850C Manual Del Usuario página 11

Assembly
K
26
H
41
K
25
H
H
41
8
Fig. 8
Hardware needed:
First, turn the grill upright. Then tilt the burner
tubes slightly and insert through the openings
in the gas cabinet.
NOTE: The burner with ignition wire MUST
be installed in the middle opening. Also,
the burners must be assembled with the
hole for the crossover tubes facing up as
shown (Fig. 8)
K
26
9
Fig. 9
Hardware needed:
Attach (2) crossover tubes to the burners
using (3) M4x8 tapping screws. (Fig. 9)
Attach Burners
to Gas Grill
K x3
Attach Crossover
Tubes
H
x3
11