Leg Assembly - Smoke hollow DG850C Manual Del Usuario

Assembly
8
22
A
A
A
A
Fig. 2
19
A
Fig. 1B
14
A
A
17A
17B
A
A
A
Fig. 1A
1
Hardware needed:
7
Note: Each leg will have an
identification label on it.
Place cabinet vertically with the gas
cabinet side up, attach the left front leg
#4 and the left rear leg #3 to cabinet
using (4) M6x12 bolts. (Fig. 1A)
Turn cabinet over and attach the right
13
front leg #2 and right rear leg #1 to the
22
cabinet using (4) M6x12 bolts. (Fig. 1B)
2
Hardware needed:
Attach cart front and rear brackets to
four legs using (8) M6x12 bolts. (Fig. 2)
A
Note: Make sure small "L" bracket on
A
the cart front bracket is located as
shown in (Fig. 2).
3
Fig. 3
Hardware needed:
Attach firebox supporting brace to right
rear leg #1 and right front leg #2 using
(4) M6x12 bolts. (Fig. 3)
Note: The flange of the firebox
supporting brace MUST face outward
and up.

Leg Assembly

A
x8
Cart Assembly:
Front/Rear Brackets
A
x8
Firebox Supporting
Brace Assembly
A
x4
9