Smoke hollow DG850C Manual Del Usuario página 14

Assembly
Fig. 13G
13
Side Burner Assembly (Continued)
G
x2
Hardware needed:
Insert valve stem into hole on side burner control panel. (Fig. 13G)
Attach side burner valve to side burner control panel using (2) M4x8
bolts as shown. (Fig. 13H)
Insert side burner through hole in side burner shelf assembly as shown.
(Fig. 13I)
Insert side burner onto side burner valve. You MUST make sure that tip
of the valve is completely INSIDE end opening of burner tube. Attach
side burner to side burner shelf assembly using (2) bolts removed during
Step 13B as shown. (Fig. 13J)
Re-insert side burner grate in place. (Fig. 13K)
Fig. 13H
G
G
Fig. 13J
Fig. 13I
Valve tip
Fig. 13K
14