Smoke hollow DG850C Manual Del Usuario página 12

Assembly
A
I
J
A
A
12
A
A
18
E
21
21
23
23
Fig. 10
A A
I
J
Fig. 12
A
A
10
Condiment Tray
Assembly
A
x5,
Hardware needed:
Attach the condiment tray to the charcoal
cabinet using (4) M6x12 bolts from INSIDE of
the cabinet as shown (Fig. 10). Attach bottom of
condiment tray to bracket on cart front bracket
with (1) M6x12 bolt and (1) M6 KEPS nut.
11
Middle Division
Plate Assembly
I
x2,
Hardware needed:
Attach the middle division plate into the cabinet
front/back panel using (2) M4x15 bolts and (2)
M5x10 bolts as shown.
Note: The (2) M4x15 bolts are assembled
in the upper part of the cabinet and the (2)
M5x10 bolts are assembled in the lower part
of the cabinet.
21
Flange should face gas
grill side.
12
Charcoal Tray Support
Bracket Assembly
A
x4
Hardware needed:
Attach the (2) charcoal tray support brackets to
the charcoal cabinet using (4) M6x12 bolts as
shown. (Fig. 12).
E
x1
J
x2
Fig. 11