Receiving The Product; Installing The Product - Grundfos SA-CSIR Manual Del Usuario

Ocultar thumbs Ver también para SA-CSIR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 77
1.2.2 Other important notes
A blue or grey circle with a white graphical symbol indicates that
an action must be taken.
A red or grey circle with a diagonal bar, possibly with a black
graphical symbol, indicates that an action must not be taken or
must be stopped.
If these instructions are not observed, it may result in malfunction
or damage to the equipment.
Tips and advice that make the work easier.

2. Receiving the product

Inspect the product for visible damage. In case you find damage to the
product, do not install it, but contact Grundfos service or sales for advice.

3. Installing the product

DANGER
Electric shock
Death or serious personal injury
- Before starting any work on the product, make sure that the
power supply has been switched off and that it cannot be
accidentally switched on.
The SA-CSIR, SA-CSCR Grundfos submersible pump control box
is intended for use with Grundfos single-phase, 3-wire submersible
motors as a starting device only.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sa-cscr

Tabla de contenido