Ambu aView 2 Advance Manual Del Usuario página 26

e) Re-insert screws on all four edges of the displaying unit
Insert 10 screws in total around the displaying unit edge. Four screws on top and bottom, and one screw on each
side. If any screws are missing use the new ones supplied with the spare part kit.
f) Click the name plates in place (see Figure 33)
Click down the two ends of the name plate first (see Figure 33). Then click down the rest of the name plate towords
the center. The Ambu logo on the name plate must be readable from the front side of the displaying unit. If the name
plates are damaged, use the new ones supplied with the spare part kit.
g) Click the screw covers in place (see Figure 34)
When clicing the screw covers in place, be aware that they must be orientet correctly, in on order to fit (see Figure 34).
If the screw covers are damaged, use the new ones supplied with the spare part kit.
26
Figure 32 Put on the back casing till it clicks in place
Figure 33 Put on the name plates