Descargar Imprimir esta página

Imetec Titanox K113 Instrucciones De Uso página 14

Ocultar thumbs Ver también para Titanox K113:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
DO NOT expose the appliance to humidity or atmosferic agents
(rain, sun, etc.) or extreme temperatures.
The appliance must not be left unattended while it is connected to the
EN
mains supply.
Always disconnect the appliance from the mains supply before
cleaning or performing maintenance and when the appliance is not
in use.
If the appliance is faulty or malfunctions, switch it off and do not
tamper with it. Contact an authorised technical service centre for any
repairs.
If the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
The electrical safety of this appliance is only guaranteed when it
is connected correctly to an effective earthing system as required
by applicable electrical safety standards. This important safety
requirement must be verified before connecting the appliance to the
mains supply. If in doubt request a thorough check of the system by
a qualified technician.
DO NOT immerse this appliance into water or other liquids. For any
cleaning and maintenance operation refer to the instructions in the
relevant chapter.
DO NOT leave this appliance in contact with fabric and surfaces
that are easily flammable or can get damaged with heat.
This appliance must be used and rested on a flat, stable surface.
When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
DO NOT use chemical additives, scented substances or descaling
agents.
The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
For the features of the appliance, refer to the external packaging.
Use the appliance only with the supplied accessories that are an
essential part of the appliance.
DO NOT use patch cord or adaptors.
12

Publicidad

loading

Este manual también es adecuado para:

70909