Cleaning And Maintenance; Technical Specifications - Velleman HQ-Power VDPLDJBAR6 Manual Del Usuario

Unplug the power cord from the VDPLDJBAR6 and connect the foot controller to the foot controller jack [I].
Reconnect the power cord.
Foot controller functions:
pedal 1
preset
(O)
pedal 2
sound
controlled
(P)
pedal 3
freeze
(Q)
pedal 4
black out
(R)
8.

Cleaning and Maintenance

• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
9.

Technical Specifications

power supply
fuse
power consumption
LED
beam angle
dimensions
total weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 01/06/2012
All manuals and user guides at all-guides.com
VDPLDJBAR6
Press to select a built-in program.
1x white
2x red
3x green
4x blue
5x yellow
6x violet
7x cyan
8x colour change every second, continuous loop
9x colour fade every 3 seconds, continuous loop
press to enter sound controlled mode
press pedal 1 to quit sound controlled mode
hold chasing programs (8 & 9)
Press at any time to switch off all LEDs. Press again to return to previous setting.
Hold for strobe function.
230VAC ~ 50Hz
F2A/250V
50W
16 x 3W tri-colour LEDs
15°
950 x 45 x 230mm
6kg
8 ©Velleman nv