System Reset; Firmware Update; Restore Factory Settings - Roborock E5 Manual Del Usuario

Instructions for Use

System Reset

If the robot does not respond when you press a button or the
robot cannot be shut down, reset the system by pressing and
holding the button. The robot will restart automatically after
resetting.

Firmware Update

Update the robot using the Xiaomi Home app. Place the robot on
the Charging Dock and ensure that the battery level is higher than
20% before updating. The Power Indicator will flash white quickly
during a firmware update.

Restore Factory Settings

If the robot is not functioning after a system reset, press and hold
the button and the button together until the "Restoring
factory settings" voice alert sounds. The robot will then be
restored to factory settings. Ignore the "Resetting WiFi" voice alert.
24