Routine Maintenance
Main Wheels
* Clean monthly
Use a soft dry cloth to wipe and clean the main wheels.
Side Brush
* Clean monthly
1. Turn the robot over and remove the screw holding the Side
Brush.
2. Remove and clean the Side Brush.
3. Reinstall the Side Brush and tighten the screw.
Note: It is recommended to replace the Side Brush every 3-6 months to maintain the
cleaning quality.
Mop Cloth
* Clean after use
1. Remove the mop cloth from the mopping module.
2. Clean and dry the mop cloth.
Note:
• Always remove the mop cloth after cleaning to avoid filter blockage.
• If the mop cloth gets excessively dirty, the cleaning quality will be affected. Always use a
clean cloth.
• Replacing the mop cloth every 3-6 months is recommended to maintain cleaning quality.
Filter Assembly
1. Move your finger along the notch to remove both filters.
2. Install the new filters.
Note: Changing filters every 1-3 months is recommended, depending on the quality of
water and frequency of use, to ensure cleaning quality.
27
* Replacement every 1-3months is recommended