Camp Safety BLIN KIT Manual Del Usuario página 31

Ocultar thumbs Ver también para BLIN KIT:
Tabla de contenido

Publicidad

the device, this could cause damage to the rope sheath and therefore it must be thoroughly inspected. In the
adequate training for the work crew so that they can act quickly in the event of a fall, particularly in case of
horizontal/inclined use. High or low temperatures, humidity, rain, ice, oil or dust can negatively impact the
performance of the device and the ropes combined with it. Main materials of the device: aluminium allow, stainless
steel. Main material of the anchor line: polyamide.
Horizontal/inclined use
take account that use over sharp edges has additional risks and should therefore be limited as much as possible.
For horizontal use, you must take the following additional precautions:
perpendicular axis to the anchor point (
• if the edge is sharp or has a radius less than 0.5mm you must avoid any and all possibility of a fall over and provide
of fall must be taken into account when calculating the required clearance distance. Read the instructions for use
of the lifeline
INSTRUCTIONS FOR USE – CARABINERS
Summary
suitable for use in fall arrest systems for protecting against the risk of falling from heights. Some models are even
connectors are highlighted in Tab. K, identifying the reference code(s) on the marking of the connector(s) supplied
with the product.
Classes (Tab. K)
directional connector. Class Q: quick link. Class M: multiple use connectors.
Connector for via ferratas. Class X: oval connector. Class Q: quick link.
The main material that the connector is made from is indicated in Tab. K
Use
fall height. The connection of the connector is indicated in the tab.K
manual locking (
) must avoid detaching them several times in the same working day. For the proper use and
for the connection to a reliable anchor point, and a sub-system and to other fall protection systems, see Fig. K4.
Some situations can reduce the strength of the connector. Avoid positioning situations that stress the connector lever
(Fig. K5-K6
K1 to K4. The user of connectors with
29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

256501256502256503256504256505256506

Tabla de contenido