Setting The Cutting Height; How To Cut Properly - Brill Luxus 33 Manual Del Usuario

2. Setting the cutting height

Place the mower on a firm level
surface. Stand behind the mower
so that you can place one foot on
the rollers (9) (Fig. L). Loosen the
two setting screws (10). You can
now use both hands to set the
cutting height with the setting
handles (11) (Fig. M).
Model Longest
cut
Luxus 33 45 mm
Luxus 38 45 mm
Comfort 30 40 mm
Make sure that the cutting height
marking arrows (12) show the
same height on the scale on both
sides.

3. How to cut properly

The hand mowers can cut grass
up to the following lengths:
Model Length in mm
Classic 30 100
Classic 35 100
Luxus 33 140
If you want a well-looked after
lawn, the grass must always be
kept shorter.
At the beginning of the cutting
period, and with new lawns, select
a relatively high cutting height
and gradually reduce this each
time you mow the lawn. If you
want to have a well-manicured
lawn, set the cutting height to
approx. 2 cm.
All manuals and user guides at all-guides.com
(Fig. L/M)
Now tighten the setting screws (10).
The mower must be set so that
the bottom blade does not come
into contact with the ground
where there is any unevenness.
A
Attention !
Never use the mower near people,
Shortest
especially children, or animals.
cut
The user is responsible for all in-
14 mm juries.
14 mm
Before using the mower, always
18 mm
check the nuts, bolts and working
tools for wear or damage. Replace
worn or damaged blades in sets.
Cut the grass every week if pos-
sible. Frequent cutting forces
the growth into the cut stalk and
makes it resistant.
If possible, always cut the grass
when it is relatively dry. To obtain
a clear pattern, push the mower
in straight lines at an even walk-
ing pace. The cutting paths should
overlap by a few centimetres to
avoid leaving strips of grass.
A
Attention !
Be careful ! The rotating blade
roller can cause injuries !
Always make sure you have a
clear view when using the mower.
When mowing, wear proper shoes
with non-slip gripping soles and
long trousers.
Before using the mower, check the
area you want to cut and remove
any stones, pieces of wood, wire
and similar objects. The blades can
catapult objects like this at great
speed.
If the blades or the mower hit any
solid object or obstruction, have
the mower examined by an expert.
Always keep the safety distance
between the user and blade roller
shown by the push bar.
Take extra care when mowing on
embankments and slopes : make
sure you are on firm ground and
always wear shoes with non-slip
gripping soles and long trousers.
Always mow across a slope.
Take special care when moving
backwards and when pulling
the mower. Danger of stumbling !
Never place your hands or feet
on or underneath moving parts.
GB
13