Adjusting Bass; Adjusting Treble - Pioneer AVH-P6450CD Manual De Operación

Audio Adjustments
Note
• If you make adjustments when a curve other
than is selected,
CUSTOM2
is updated.

Adjusting bass

You can adjust the cut-off frequency and the
bass level.
• In mode, bass adjustment affects only
FRT1
the rear output: front output cannot be
adjusted.
1 Press 5 or ∞ to select
AUDIO MENU, and press
BASS adjustment indications are displayed.
2 Press 5 or ∞ to adjust the bass level.
Each press of 5 or ∞ increases or decreases
the bass level. – is displayed as the level is
+6 –6
increased or decreased.
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — — (Hz)
40 63 100 160
All manuals and user guides at all-guides.com
curve
CUSTOM1
from the
BASS
.
A.MENU

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
• In and modes, treble adjustment
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press 5 or ∞ to select
AUDIO MENU, and press
TREBLE adjustment indications are displayed.
2 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level. – is displayed as the level
+6 –6
is increased or decreased.
3 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — — (Hz)
2.5k 4k 6.3k 10k
Section
from the
TREBLE
.
A.MENU
En 47
10