Changing The Setup Menu - Pioneer X-HM30V-S Manual De Instrucciones

Changing the setup menu

Turn on the TV, and switch the input to the "VIDEO 1",
"VIDEO 2", etc. accordingly.
STANDBY/ON
SETUP/VIDEO MODE
+
DVD/CD
1 Press the STANDBY/ON button to turn the power on.
The startup screen appears.
l
The startup screen does not appear
l
when the input is not set to the disc
mode. Press the DVD/CD button
on the remote control or INPUT
button on main unit repeatedly to
select DISC mode.
Setup menu Selectable parameters (* indicates default setting)
GENERAL
SETUP
GENERAL AUDIO DOLBY
- - GENERAL SETUP PAGE - -
PAGE
TV DISPLAY PS
ANGLE MARK
ON
OSD LANGUAGE ENG
SCREEN SAVER ON
LAST MEMORY OFF
GO TO GENERAL SETUP PAGE
AUDIO
SETUP GENERAL AUDIO DOLBY
- - AUDIO SETUP PAGE - -
PAGE ANALOG AUDIO
DIGITAL AUDIO
GO TO AUDIO SETUP PAGE
All manuals and user guides at all-guides.com
MEMORY/FOLDER
ENTER
TV DISPLAY 4:3 PANSCAN*
4:3 LETTERBOX
VIDEO PREFEREN.
16:9
WIDE SQUEEZE
ANGLE ON*
MARK OFF
OSD ENGLISH*
LANGUAGE GERMAN
FRENCH
ITALIAN
SPANISH
SCREEN ON*
SAVER
OFF
LAST ON*
MEMORY
OFF
ANALOG DOWNMIX
AUDIO
VIDEO PREFEREN.
DIGITAL DIGITAL
AUDIO OUT
LPCM OUT
En-13
2 Press the SETUP/VIDEO MODE button.
3 Press the  or  button to select a menu and press
the ENTER button.
See the list on pages 13 - 15 for setup menu.
l
4 Press the , ,  or  button to change the setting
and press the ENTER button.
See the list on pages 13 - 15 for the selectable
l
parameters.
5 Press the SETUP/VIDEO MODE button.
The setting is completed.
l
To change other settings, begin from step 2.
l
Notes:
During playback, "PREFERENCE" settings cannot be
l
changed.
Settings are stored even if the unit is set to the stand-
l
by mode.
The backup function protects the stored settings for a
l
few hours should there be a power failure or the AC
power lead disconnection.
If the startup screen is blurred, change the TV type in
l
the setup menu.
The screen mode should be set according to
the connected TV type (for details, see page
16).
You can select the desired OSD (On Screen
Display) language for the setup menu or
playback control screen.
A screen saver appears.
The screen saver disabled.
If accidentally push STANDBY/ON or OPEN/
CLOSE button during playback mode, you
can resume playback from the point playback
is stopped after power on back or you push
the OPEN/CLOSE button to close the disc
tray.
Last memory not function.
LT/RT
STEREO*
SPDIF OFF When playing a disc recorded with Dolby
SPDIF/ Digital or DTS, the corresponding digital
RAW* signals will be output.
SPDIF/PCM l PCM : Choose this setting if the decorder
cannot support Dolby Digital or DTS.
l RAW : Choose this setting if the decorder
can support Dolby Digital or DTS.
48KHZ* Select the sampling frequency at 48 kHz/16
96KHZ bit or 96 kHz/24 bit capability after you select
SPDIF/PCM at SPDIF SETUP.
Description