System Status; Main Menu; Input Setup - Rotel RVE-1060 Manual De Instrucciones

RVE-1060 Video Enhancer

System Status

�������������
�����������������������
�����������������������
����������������������������
��������������������������
����������������������������
�
���������������������������
�
The SYSTEM STATUS menu provides a snap-
shot of the current system settings and a start-
ing point for reaching all other screens and
menus. This screen appears when you press
the remote SETUP button and displays the
following information:
INPUT 1: the input source associated with
the INPUT 1 buttons.
INPUT 2: the input source associated with
the INPUT 2 buttons.
INPUT 3: the input source associated with
the INPUT 3 buttons.
INPUT 4: the input source associated with
the INPUT 4 buttons.
INPUT 5: the input source associated with
the INPUT 5 buttons.
VIDEO OUTPUT: the currently selected out-
put mode for the highlighted source.
No changes can be made using this screen;
it only provides information. To go to the rest
of the menus, press the ENT button to go to
the MAIN menu. Press the SETUP button on
the remote to cancel the display and return
to normal operation.
All manuals and user guides at all-guides.com

Main Menu

���������
���������������������
���������������������
���������������������
���������������
�
������������
The MAIN MENU provides access to OSD
screens for various configuration options.
MAIN MENU is reached by pressing the
ENT button from the SYSTEM STATUS menu
described above or from most other menus.
To go to the desired menu, move the highlight
using the UP/DOWN buttons on the remote
and press the ENT button. Press the SETUP
button on the remote to cancel the display
and return to normal operation.
20

Input Setup

�����������
�����������������������
�����������������������
����������������������������
��������������������������
����������������������������
�
�����������������
�
The INPUT SETUP menu configures the
source inputs and is reached from the MAIN
menu. The menu lists the five INPUTS and
the sources currently associated with each
one.
To modify an INPUT, place the highlight
on the desired line using the UP/DOWN
buttons and press the ENT button. This takes
you to an INPUT menu where changes can
be made. See the next section.
To return to the MAIN menu, high-
light MAIN MENU and press ENT.
When you select an input for changes, the
following screen appears.
�������
���������������������
���������������������
���������
������������������������
��������
�
To change the source associated
with the INPUT, highlight the SOURCE
line and use the LEFT/RIGHT buttons to step
through the options until the desired source
appears.
INPUT LABEL: The twelve character label
for the input can be customized. Place the
highlight on this line to begin labelling. The
first character in the label will be flashing.
1. Press the LEFT/RIGHT buttons on the re-
mote to change the first letter, scrolling
through the list of available characters.
2. Press the ENT button on the remote to
confirm that letter and move to the next
position.