Monitor Setup; Other Options - Rotel RVE-1060 Manual De Instrucciones

3. Repeat steps 1 and 2 until all twelve char-
acters (including blank spaces) have been
completed. The final press of the ENT but-
ton saves the new label.
To return to the INPUT SETUP menu,
highlight INPUT SETUP MENU and press
ENT.
All manuals and user guides at all-guides.com
21

Monitor Setup

�������������
������������������������������
���������������������������
��������
�����������������
�
The MONITOR SETUP menu configures the
monitor output settings and is reached from
the MAIN menu.
MONITOR INTER: Select the type of
connection made to the HDTV monitor. The
choices are HDMI/DVI or ANALOG.
HDMI AUDIO OUT: HDMI cables can
carry audio signals to the TV in addition
to video. If you wish to send audio using
the HDMI cables, select YES. If not, select
NO. When the MONITOR INTER setting is
ANALOG or not set to HDMI, this item is
automatically set to NO.
To return to the MAIN menu, high-
light MAIN MENU and press ENT.

Other Options

������������
��������������������������
������������������������
��������
��������������������������
������������������
�������������������������������
�����������������
This OTHER OPTIONS menu, accessed from
the MAIN menu, provides access to several
miscellaneous settings as follows:
SETUP OSD: This setting determines how
long the SETUP menus appear on screen if
there are no button presses. The default is
CONTINUE which displays the menus until
they are cancelled by pressing the SETUP
button. Other options are 20, 30, 40, or
50 seconds.
OSD: This setting determines how long the
status displays appear on screen when a set-
ting is changed during normal operation. The
default is 10 seconds. Other options are OFF
(which prevents the display entirely) and 2,
4, 6, or 8 seconds.
EXT OSD: Specifies the type of video con-
nection from a Rotel surround processor to
display the processor's ON-SCREEN DIS-
PLAY menus. The options are COMPOSITE
and S-VIDEO.
UPGRADE: This option enables the COM-
PUTER I/O port for upgrading the RVE-1060
software from a computer. The default is NO.
To upgrade the RVE-1060, change this set-
ting to YES. The baud rate is automatically
set to 38,400 bps.
VERSION: Displays the current software
version.
To return to the MAIN menu, highlight
MAIN MENU and press ENT.
English