Gcommissioning; G.1 Preliminary Checks, Adjustments And Operational Tests - Nordcap Zanussi 406402279 Instrucciones De Instalación

ENGLISH
1 ON/OFF button
Press this button to activate the appliance. Press it
again to deactivate.
2 ON indicator
When the appliance is on, this indicator is lit up.
3 Water temperature indicator
When the water in the tank and boiler reach the
operating temperature, this indicator is lit up.
4 START button
This button starts washing cycle. This cycle is
recommended for washing normally dirty dishes.
5 Wash cycle indicator
This indicator is on, when you start the washing cycle.
It is off, when the washing cycle is finished.
G COMMISSIONING
G.1 Preliminary checks, adjustments and
operational tests
WARNING
These operations must only be
carried out by specialized techni-
cians provided with adequate
personal protection equipment
(e. g. safety footwear, gloves,
glasses, etc.), tools and suitable
ancillary equipment with the
appliance switched off and cold.
Electrical and plumbing checks
Before starting the machine:
• check correct connection of the electrical wires that feed the
machine;
• make sure the power supply voltage and frequency match
the data given in the technical data table (C TECHNICAL
DATA);
18
1 2 3
1 2 3
6 Drain button
Press this button to drain the water of the washing tank.
When the cycle is selected, the button indicator is lit up.
This option is available only in the models with drain
pump.
7 Cold rinse button (available depending on the
model)
At the end of the wash cycle, press this button to start
the cold rinse cycle. Particularly suitable for rinsing
glasses. The duration of the cold rinse cycle is related
to how much time the same button is pressed.
• check correct connection of the water supply and drain
pipes (see paragraph E.6 Plumbing connections);
• make sure all the guards, safety devices and emergency
switches are in place and efficient.
Check the positioning of tank components
• Make sure that, the overflow "1", the pump filter "2"
(depending of the model), the tank filter "3" (depending of
the model), the upper and lower wash arm "4" and the upper
and lower rinse arm "5" are correctly fitted (see picture
below).
4 5
4 5 7
6
6