A.3 Personal Protection Equipment; A.4 Transport, Handling And Storage - Nordcap Zanussi 406402279 Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
ENGLISH
• Machine positioning, installation and disassembly must be carried out by the specialised
personnel in conformity with the current safety regulations, regarding the equipment
used and the operating procedures.
A.3
Personal protection equipment
Summary table of the Personal Protection Equipment (PPE) to be used during the various
stages of the machine's service life.
Stage
Protective
garments
Transport
Handling
Unpacking
Installation
Normal use
Adjustments
Routine
cleaning
Extraordi-
nary
cleaning
Maintenance
Dismantling
Scrapping
Key:
PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF NECESSARY
PPE NOT REQUIRED
1. During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by
operators, specialized personnel or users can involve exposure to damage to health (depending on the
model).
2. During these operations, gloves must be heatproof and suitable for contact with water and the substances
used (refer to the safety data sheet of the substances used for the information regarding the required PPE).
Failure to use the personal protection equipment by operators, specialised personnel or users can involve
exposure to chemical risk and cause possible damage to health (depending on the model).
3. During these operations, gloves must be suitable for contact with chemical substances used (refer to the
safety data sheet of the substances used for information regarding the required PPE). Failure to use the
personal protection equipment by operators, specialized personnel or users can involve exposure to
chemical risk and cause possible damage to health (depending on the model).
A.4
Transport, handling and storage
• Due to their size, the machines cannot be stacked on top of each other during transport,
handling and storage; this eliminates any risks of loads tipping over due to stacking.
• Do not stand under suspended loads during loading or unloading operations.
Unauthorized personnel must not enter the work area.
• The weight of the appliance alone is not sufficient to keep it steady.
8
Safety
footwear
Gloves
Glasses
1
2
1
3
ˉ
1
3
ˉ
Safety
helmet

Publicidad

Tabla de contenido
loading

Tabla de contenido