Inverter Type Label - SMA SUNNY TRIPOWER STORAGE 60 Instrucciones De Instalación

SMA Solar Technology AG
Icon Explanation
Risk of burns due to hot surfaces
The product can get hot during
operation. Avoid contact during
operation. Allow the product to cool
down sufficiently before carrying out
any work.
Three-phase alternating current
without neutral conductor
Direct current
The product has no galvanic isolation.
Observe the documentations
Observe all documentations supplied
with the product.
WEEE designation
Do not dispose of the product together
with the household waste but in
accordance with the disposal
regulations for electronic waste
applicable at the installation site.
The product is suitable for outdoor
installation.
Degree of protection IP65
The product is protected against the
penetration of dust and water that is
directed as a jet against the enclosure
from all directions.
RoHS labeling
The product complies with the
requirements of the applicable EU
directives.
CE marking
The product complies with the
requirements of the applicable EU
directives.
UKCA marking
The product complies with the
regulations of the applicable laws of
England, Wales and Scotland.
Installation Manual

3.4 Inverter Type Label

The type label uniquely identifies the inverter. You will
require the information on the type label to use the product
safely and when seeking customer support from the
SMA Service Line. You will find the following information on
the type lable:
• Device type (Model)
• Serial number (Serial No.)
• Date of manufacture
• Device-specific characteristics
3 Product Overview
STPS60-IA-xx-13 19