Installation Conditions - SMA SUNNY TRIPOWER STORAGE 60 Instrucciones De Instalación

11 Technical Data

11.3 Installation Conditions

Parameters
Operating temperature range
Storage temperature
Max. temperature for installation and maintenance
Max. permissible value for relative humidity
(non-condensing)
Pollution Degree
Environmental category IEC62109-1
Environmental class in accordance with IEC 60721-3-4
Cooling concept
Air quality - general
Air quality - coastal, heavy industrial and agricultural zones
Vibration
Enclosure protection class
UL 50E enclosure type
Maximum operating altitude above mean sea level
Installation
* Potential power reduction above 45°C (for further information see technical information "Efficiencies and Derating")
** Installation at altitudes > 2000 m are possible on request; contact SMA Solar Technology AG for this.
46 STPS60-IA-xx-13
Specification
-25°C to 60°C*
-30°C to 60°C
Outdoor, wet (see Section 5.2, page 21)
4K4H/4Z4/4B2/4S3/4M2/4C2
Forced air cooling
ISA S71.04-1985
Class G3 (at 75% rF)
Must be measured and classified in accordance with ISA
S71.04-1985: G3 (at 75% RH)
NEMA 3R
2000 m above sea level (power reductions may occur
starting at an altitude of 1000 m).**
Avoid constant contact with water.
Avoid direct solar irradiation.
Ensure adequate air flow.
Mount on non-flammable surface.
Mount upright on vertical surface.
Prevent dust and ammonia gases.
SMA Solar Technology AG
45°C
95 %
PD2
< 1 G
IP65
Installation Manual