General View Of Application; Application; Coating Material; Coating Materials With Sharp-Edged Additional Materials - WAGNER SUPER FINISH 17EX Manual De Instrucciones

Super Finish 17ex
2

GENERAL VIEW OF APPLICATION

2.1

APPLICATION

SuperFinish 17ex is
the atomization of different painting materials.
Thanks to the particularly fine atomization, the Air Coat tech-
nique is especially suitable for top-quality paint work.
The SF 17ex is suitable for use in potentially explosive areas
(zone 1) in accordance with the 2014/34/EU directive.
2.2

COATING MATERIAL

Diluting lacquers and paints or those containing solvents, two-
component coating materials, dispersion and latex paints.
No other materials should be used for spraying without WAG-
NER's approval.
The unit is able to process coating materials with up to
15,000 mPas. If highly viscous coating materials cannot be taken
in or the performance of the unit is to low, the paint must be
diluted in accordance with the manufacturer's instructions.
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying
and can, in fact, lead to interruption of opera-
tion.
2.2.1
COATING MATERIALS WITH SHARP-EDGED
ADDITIONAL MATERIALS
These particles have a strong wear and tear effect on valves and
tips, but also on the heating hose and spray gun. This impairs
the durability of these wearing parts considerably.
an pneumatic driven
2.2.2

FILTERING

unit for Sufficient filtering is required for fault-free operation. To this
purpose the unit is equipped with a suction filter (Item 1) and
an insertion filter in the spray gun (Item 2). Regular inspection
of these filters for damage or soiling is urgently recommended.
A high-pressure filter (Item 3) -available as accessory- is rising
up the filtering surface and will make the work more comfort-
able.
1
GENERAL VIEW OF APPLICATION
3
GB
2
35